锂电池_厂家_价格_品牌_库存

型号：BQ24079TRGTR 编号：C2868266

封装：QFN-16-EP(3x3)

品牌：TI(德州仪器)

BQ24079T 具有电源路径、4.1V VBAT 和基于电压的 TS 的独立型单节电池 1.5A 线性充电器

数据手册

1+
￥24.57
10+
￥21.7
30+
￥20.24

有货

立即购买

型号：BQ29312APW 编号：C5219020

封装：TSSOP-24-175mil

品牌：TI(德州仪器)

BQ29312A 二、三、四节锂离子或锂聚合物电池保护 AFE

数据手册

1+
￥24.8
10+
￥24.17
60+
￥23.75

有货

立即购买

型号：BQ24253RGER 编号：C2864881

封装：VQFN-24-EP(4x4)

品牌：TI(德州仪器)

BQ24253 单节 2A 独立降压型锂离子电池充电器

数据手册

1+
￥25.22
10+
￥24.59
30+
￥24.17

有货

立即购买

型号：BQ29312APWR 编号：C5219021

封装：TSSOP-24-175mil

品牌：TI(德州仪器)

BQ29312A 二、三、四节锂离子或锂聚合物电池保护 AFE

数据手册

1+
￥25.93
10+
￥25.27
30+
￥24.83

有货

立即购买

型号：BQ2000SN-B5TR 编号：C544696

封装：SOIC-8

品牌：TI(德州仪器)

BQ2000 具有峰值电压检测终端的开关模式多化合物电池充电器

数据手册

1+
￥27.86
10+
￥27.15
30+
￥26.68

有货

立即购买

型号：FLY.984065.3000 编号：C5358465

封装：-

品牌：FLYOUNG(远阳)

电池规格：聚合物锂电池984065-3000mAh 3.7V 工作温度-10℃～55℃，电芯尺寸9.8x40x65mm，倍率电池，快充电池，锂电池，锂离子电池，方形电池，适用于手持终端，个人护理电子，医疗电子，掌上游戏机。用于手工焊接。

数据手册

单价：
￥29.56 / 个

订货

我要订货

型号：BQ25120F3AYFPR 编号：C3682286

封装：DSBGA-25(2.5x2.5)

品牌：TI(德州仪器)

BQ25120F3A 700nA 低 IQ 高度集成式电池充电管理解决方案

数据手册

1+
￥30.15
10+
￥29.45
30+
￥28.97

有货

立即购买

型号：BQ24113RHLR 编号：C2876731

封装：VQFN-20-EP(3.6x4.6)

品牌：TI(德州仪器)

BQ24113 采用 WQFN-20 封装的独立 1 至 2 节 2A 同步降压电池充电器

数据手册

1+
￥33.32
10+
￥32.48
30+
￥31.93

有货

立即购买

型号：BQ25713BRSNT 编号：C2870112

封装：QFN-32-EP(4x4)

品牌：TI(德州仪器)

BQ25713B 具有 USB type C PD 支持的 I2C 端口（地址 2）1 至 4 节 NVDC 降压/升压电池充电控制器

数据手册

1+
￥33.66
10+
￥28.58
30+
￥25.57

有货

立即购买

型号：BQ24160ARGER 编号：C2860866

封装：VQFN-24-EP(4x4)

品牌：TI(德州仪器)

BQ24160A 具有双输入、电源路径且无 WD 的 I2C 单节 2.5A 降压电池充电器

数据手册

1+
￥34.03
10+
￥33.18
30+
￥32.61

有货

立即购买

型号：BQ24108RHLR 编号：C543027

封装：VQFN-20-EP(3.5x4.5)

品牌：TI(德州仪器)

BQ24108 具有闪烁状态引脚的独立单节 2A 同步降压电池充电器

数据手册

1+
￥35.06
10+
￥34.18
30+
￥33.6

有货

立即购买

型号：BQ25960HYBGR 编号：C34268965

封装：DSBGA-36

品牌：TI(德州仪器)

98.1% peak efficiency, 8-A battery charging solution using switch capacitor architecture for 1-cell Li-ion battery. The switched cap architecture allows the cable current to be half the charging current, reducing the cable power loss, and limiting temperature rise. The dual-phase architecture increases charging efficiency and reduces the input and output cap requirements. When used with a main charger such as BQ2561x or BQ2589x, the system enables full charging cycle from trickle charge to termination with low power loss at Constant Current (CC) and Constant Voltage (CV) Mode.。Supports 5-A Bypass Mode charge (previously called battery switch charge) through internal MOSFETs. The Rdson in Bypass Mode charging path is 21 mΩ for high-current operation. The integrated Bypass Mode allows backward compatibility of 5-V fast charging adapter to charge 1-cell battery.。Supports dual input configuration through integrated mux control and driver for external N-FETs. It also allows single input with no external N-FET or single N-FET.。Integrates all the necessary protection features to support safe charging, including input overvoltage and overcurrent protection, output overvoltage and overcurrent protection, input undercurrent and reversecurrent protection, temperature sensing for the battery and cable, and junction overtemperature protection in both Switched Cap and Bypass Mode.。Includes a 15-bit analog-to-digital converter (ADC) to provide VAC voltage, bus voltage, bus current, output voltage, battery voltage, battery current, input connector temperature, battery temperature, junction temperature, and other calculated measurements needed to manage the charging of the battery from the adapter, or wireless input, or power bank.

数据手册